Neil Williams, PhD, PE
President, INNVIRON Corporation
Expertise:
Wastewater Treatment, Solid and Hazardous Waste Management, Remedial Design, Constituent Transport, Civil/Structural Engineering & Construction Management
Experience:
Engineering Management Company International
2005-present
President, CEO
Globex Engineering International, Inc.
2002-present
Principal, CEO, President
Innviron Corporation
1998-present
Principal, President, CEO
Globex Engineering & Development
1997-1998
President
GeoSyntec Consultants, Inc.
1998-1997
Principal, CEO, President
Georgia Institute of Technology
1984-1988
Assistant Professor
Woodward Clyde Consultants
1982-1984
Project Engineer
University of California at Berkeley
1979-1982
Research Assistant
Utah State University
1978-1979
Lecturer
Civil Engineering Research Facility, NM
1977-1978
Research Engineer
Dr. Williams has more than 30 years of experience in the design of environmental management facilities, including wastewater treatment systems, water treatment systems, solid waste management facilities, medical waste treatment facilities, sorting and recycling facilities, and the remedial design of industrial facilities. This experience includes the design of a mobile wastewater treatment facility for the US Air Force, and design of wastewater treatment facilities for Logan, Utah, Ruidoso, New Mexico, and Okeechobee County, Florida, and design of wastewater treatment facilities in Karachi, Pakistan, Barka, Oman, Taqah, Oman, and Mirbat, Oman, El Hermel, Lebanon, River Bend Prairie, IL, Countryside, IL, Bouga and Hamam Guerguor, Algeria, and several other locations. In addition, Dr. Williams has designed an Aerobic Sludge Digester and Compost Plant for Salalah, Oman, to process
food waste, green waste, and wastewater from Dhofar Municipality.
Dr. Williams has designed remedial measures to treat contaminated ground water at several industrial facilities, including the Sugar Creek Refinery in Missouri, the Chevron Facilities in Nigeria, 7 Chevron Service Stations and two Storage Facilities in Puerto Rico, LCP Chemical Site in Cinnaminson, New Jersey, CCC Chemical Site in Kansas City Missouri, Motco Facilities in Texas City, Texas, Aidex Chemical site in Iowa, Tacoma Well 12A site in Tacoma, Washington, a newspaper facility in Washington, D.C., 3 paper production facilities, 5 wood treatment facilities, battery recycling facility, propeller production facility in Cleveland, Ohio, more than 25 manufactured gas plant sites, and more than 50 landfill sites. Dr. Williams has performed research and consulting services in the environmental management area for over 20 years. These activities have included the design,
remediation, or closure for more than 50 industrial facilities, CERCLA studies and designs, preparation of RCRA permits, remedial investigations and feasibility studies, hydrogeologic assessments, odor studies and remedial designs, ground-water and constituent transport modeling, and design of ground-water recovery and treatment
systems. In addition, Dr. Williams has provided expert testimony for several industrial clients on waste management facilities, has development design standards, requirements, and designs for industrial parks and facilities, and has worked with private industry to upgrade existing facilities to meet new environmental requirements, and implement environmental protection strategies.
Dr. Williams has extensive experience in the design, permitting, construction, and operation of solid waste management facilities. This includes landfills, leachate treatment facilities, gas treatment facilities, waste-to-energy facilities, sorting facilities (material recovery facilities), compost plants, medical waste treatment facilities, and hazardous waste treatment facilities. Dr. Williams has provided design, permitting, construction, and/or operations management on more than 250 solid waste management projects in US and around the World.
Registrations
PE (AZ,AK,FL,GA,IL,IN,KS,MI,NJ,NM,OH,OK,PA,SC,VA,PR, NCEES)
Education
President, INNVIRON Corporation
Expertise:
Wastewater Treatment, Solid and Hazardous Waste Management, Remedial Design, Constituent Transport, Civil/Structural Engineering & Construction Management
Experience:
Engineering Management Company International
2005-present
President, CEO
Globex Engineering International, Inc.
2002-present
Principal, CEO, President
Innviron Corporation
1998-present
Principal, President, CEO
Globex Engineering & Development
1997-1998
President
GeoSyntec Consultants, Inc.
1998-1997
Principal, CEO, President
Georgia Institute of Technology
1984-1988
Assistant Professor
Woodward Clyde Consultants
1982-1984
Project Engineer
University of California at Berkeley
1979-1982
Research Assistant
Utah State University
1978-1979
Lecturer
Civil Engineering Research Facility, NM
1977-1978
Research Engineer
Dr. Williams has more than 30 years of experience in the design of environmental management facilities, including wastewater treatment systems, water treatment systems, solid waste management facilities, medical waste treatment facilities, sorting and recycling facilities, and the remedial design of industrial facilities. This experience includes the design of a mobile wastewater treatment facility for the US Air Force, and design of wastewater treatment facilities for Logan, Utah, Ruidoso, New Mexico, and Okeechobee County, Florida, and design of wastewater treatment facilities in Karachi, Pakistan, Barka, Oman, Taqah, Oman, and Mirbat, Oman, El Hermel, Lebanon, River Bend Prairie, IL, Countryside, IL, Bouga and Hamam Guerguor, Algeria, and several other locations. In addition, Dr. Williams has designed an Aerobic Sludge Digester and Compost Plant for Salalah, Oman, to process
food waste, green waste, and wastewater from Dhofar Municipality.
Dr. Williams has designed remedial measures to treat contaminated ground water at several industrial facilities, including the Sugar Creek Refinery in Missouri, the Chevron Facilities in Nigeria, 7 Chevron Service Stations and two Storage Facilities in Puerto Rico, LCP Chemical Site in Cinnaminson, New Jersey, CCC Chemical Site in Kansas City Missouri, Motco Facilities in Texas City, Texas, Aidex Chemical site in Iowa, Tacoma Well 12A site in Tacoma, Washington, a newspaper facility in Washington, D.C., 3 paper production facilities, 5 wood treatment facilities, battery recycling facility, propeller production facility in Cleveland, Ohio, more than 25 manufactured gas plant sites, and more than 50 landfill sites. Dr. Williams has performed research and consulting services in the environmental management area for over 20 years. These activities have included the design,
remediation, or closure for more than 50 industrial facilities, CERCLA studies and designs, preparation of RCRA permits, remedial investigations and feasibility studies, hydrogeologic assessments, odor studies and remedial designs, ground-water and constituent transport modeling, and design of ground-water recovery and treatment
systems. In addition, Dr. Williams has provided expert testimony for several industrial clients on waste management facilities, has development design standards, requirements, and designs for industrial parks and facilities, and has worked with private industry to upgrade existing facilities to meet new environmental requirements, and implement environmental protection strategies.
Dr. Williams has extensive experience in the design, permitting, construction, and operation of solid waste management facilities. This includes landfills, leachate treatment facilities, gas treatment facilities, waste-to-energy facilities, sorting facilities (material recovery facilities), compost plants, medical waste treatment facilities, and hazardous waste treatment facilities. Dr. Williams has provided design, permitting, construction, and/or operations management on more than 250 solid waste management projects in US and around the World.
Registrations
PE (AZ,AK,FL,GA,IL,IN,KS,MI,NJ,NM,OH,OK,PA,SC,VA,PR, NCEES)
Education
PhD Geo-Tech Engineering (UC, Berkeley), MS GTE, BSCE (Utah State Univ.)